 |
|
 |
| |
|
|
| |
|
|
 Be Aware of
Wires ~ When you are installing
radiant barrier plywood after removing old wooden cedar shingles, remove
only every other 1x4. If ALL are removed there could be trouble with the
wiring in the house. |
|
Realign the
1x4’s ~ When you are installing plywood
after removing old wooden cedar shingles, be sure to pull up the 1x4’s as you’re
laying the decking to make a ledge for each sheet (all plywood must also be
laid with the grain).
|
|
|
|
|
|
|
|
|
 Inspections
~ A house could not
pass inspection when trying to sell if the roof decking was not installed
properly. |
|
 Remove
Plywood ~ Roofs sometimes look like
they have huge dips or waves in them because of the rafters being
un-centered, foundation problems or poor workmanship at the time of original
construction. The new roof will look the same unless you address the issue
by reframing the rafters. |
|
|
|
|
 |
|
|
|
Fascia
Boards |
|
|
 New 1x2’s
~ Always include drip edge in the ordering of a new roof. On the upper
edge of the fascia board next to the shingles there should be a 1x2 strip
of wood also. These two items when installed properly help protect the
fascia board. |
|
 |
|
|
|
|
|
|
|
|
 |
|
 |
| |
© Copyright 2000 l Systematic Companies l All Rights Reserved.
|
|
