Low Slope

Each of these cap sheets contain the inherent advantages of SBS-modified asphalt. SBS-modified asphalt has a number of characteristics that improve its ability to be applied easily and perform over the years. Call us for an evaluation report for your commercial roof, you’ll be glad you did.

• An enormous capacity to stretch and recover-up to 15 times its original length without breaking or separating.

• Remains pliable as temperatures drop well below freezing.

• Some of these cap sheets can be cold-process applied; others hot-asphalt applied; and some torch applied.

Application Descriptions

Material Descriptions

Awaplan Premium FR

is reinforced with a 250 g/m2 non-woven polyester mat saturated with  asphalt and coated on both sides with fire-resistant SBS-rubber-modified asphalt, and surfaced with ceramic granules for protection from ultraviolet degradation. Fire resistant SBS-modified asphalt roll roofing, granule-surfaced. Consists of a 250 g/m² polyester mat saturated with asphalt and coated with patented fire-resistant SBS-modified asphalt. It is available in mop grade and exhibits tremendous elasticity and strength with superior resistance to thermal shock and punctures. Awaplan Premium FR is suitable for flashing as well as field roofing.
 

 

 

 

Awaplan 170 FR

is reinforced with a 180  g/m2 non-woven polyester mat saturated with asphalt and coated on both sides with fire-resistant SBS-rubber-modified asphalt, and surfaced with ceramic granules for protection from ultraviolet degradation. SBS-modified asphalt roll roofing, granule-surfaced. Consists of a 180 g/m² polyester mat saturated with asphalt and coated with fire-resistant SBS-modified asphalt. It is available in mop grade and exhibits tremendous elasticity and strength with superior resistance to thermal shock and punctures and is suitable for flashing as well as field roofing.
 

 

 

Awaplan 170

is reinforced with a 180  g/m2 non-woven polyester mat saturated with asphalt and coated on both sides with SBS-rubber-modified asphalt, and surfaced with ceramic granules for protection from ultraviolet degradation. SBS-modified asphalt roll roofing, granule-surfaced. Medium weight Awaplan 170 consists of a 180 g/m² polyester mat saturated with asphalt and coated with SBS-modified asphalt. It exhibits tremendous elasticity and strength with superior resistance to thermal shock and punctures and is suitable for flashing as well as field roofing.
 

 

 

Awaplan Heat Welding

is reinforced with a 250 g/m2 non-woven polyester mat saturated with asphalt and coated on both sides with SBS-rubber-modified asphalt, and surface with ceramic granules for protection from ultraviolet degradation. Modified asphalt roll roofing, granule-surfaced. Awaplan heat Welding is a premium grade product which features a 250g/m² polyester mat saturated with asphalt and coated with SBS-modified asphalt. Awaplan Premium and Awaplan Heat Welding exhibit tremendous elasticity and strength with superior resistance to thermal shock and punctures. Suitable for flashing as well as field roofing, this premium product includes hot-asphalt, heat-weld, and cold-applied application options.
 

Awaplan Versa-Smooth

is reinforced with a 180 g/m2 non-woven polyester mat saturated with asphalt and coated on both sides with SBS-rubber-modified asphalt. Awaplan Versa-Smooth is part of the TAMKO Awaplan line of SBS-modified products and is designed for applications that demand superior performance. Designed to providing outstanding tensile strength, elasticity, fatigue resistance, puncture resistance, crack-bridging capacity, and low-temperature flexibility.

• A smooth-surfaced version of Awaplan 170
  with added SBS-modified asphalt back
  coating for torching applications

• 180-gram polyester mat

• 12-year limited product warranty

• 5- to 15-year system limited warranties available

• Quality modified base sheet for 2-ply modified systems

• Quality flashing material when installed with an approved
  coating

• U.L. Classified Membrane

Awaflex FR

is reinforced with a 155 g/m2 non-woven polyester mat saturated with asphalt and coated on both sides with fire-resistant SBS-rubber-modified asphalt, and surfaced with ceramic granules for protection form ultraviolet degradation. Awaflex is a lightweight, highly flexible SBS modified cap sheet constructed with a non-woven polyester mat. The mat is saturated with asphalt, coated on both sides with fire-resistant SBS rubber modified asphalt and then surfaced with ceramic granules for protection from ultraviolet degradation.

• Lightweight

• Flexible for easier workability

• Excellent cold weather performance

• Puncture and tear resistant

• Cold or hot process application

• 10-year limited product warranty

• Available in white or slate grey granule finishes

• Minimal dead load weight

Awaflex®

is reinforced with a 155  g/m2 non-woven polyester mat saturated with asphalt and coated on both sides with SBS-rubber-modified asphalt, and surfaced with ceramic granules for protection from ultraviolet degradation.

• Lightweight

• Flexible for easier workability

• Excellent cold-weather performance

• Puncture and tear resistant

• Cold or hot process application

• 10-year limited product warranty

• Available in white or black granule finishes

• Minimal dead load weight

 

Versa-Cap FR®

consists of a TAMKO fiberglass mat coated on both sides with fire-resistant SBS-rubber-modified asphalt, and surfaced with ceramic granules for protection from ultraviolet degradation. Manufactures SBS-modified fiberglass products to offer a lower-cost, lighter-weight alternative to Awaplan. Made by fiberglass mats using a computer-controlled monitoring system to maintain precise thickness and fiber formation. This assures high-quality product construction and long-life characteristics for the entire roofing system.

• High-performance fiberglass mat

• Coated on both sides with fire-rated SBS-modified asphalt

• Surfaced with ceramic mineral granules for U.V. protection

• 10-year limited product warranty

• Apply with hot asphalt only

• 5- to 15-year system limited warranties available

• U.L. Classified Membrane

 

Awaplan Versa-Flex™ 

is reinforced with a 180 g/m2 non-woven polyester mat saturated with asphalt and coated on both sides with SBS-rubber-modified asphalt and surfaced with a mineral parting agent. It is used as the base ply in 2-ply modified system specifications 204 and 204 FR, and as a smooth surfaced modified membrane in Series 1300 specifications. It is easily applied with hot asphalt or with approved cold-process adhesive. The advantages of VERSAFLEX include;

• High performance characteristics over a
  broad temperature range

• Hot mopping, or cold process applied

• 10 year labor and material guarantee

• Minimal dead load weight

• Excellent cold weather flexibility

• High puncture and tear resistance

Versa-Base®

consists of a TAMKO fiberglass mat coated on both sides with SBS-rubber-modified asphalt. TAMKO® manufactures this SBS-modified fiberglass product to offer a lower-cost, higher performing alternative to Awaplan. Made by fiberglass mats using a computer-controlled monitoring system to maintain precise thickness and fiber formation. This assures high-quality product construction and long-life characteristics for the entire roofing system.

• TAMKO fiberglass mat coated on both sides
  with SBS-modified asphalt

• Use as base ply in select TAMKO
  specifications or as high-performance
  alternative to TAMKO Glass-Base® or
  Type 43 Coated Base Sheet

• 5-year limited product warranty

• Apply with hot asphalt or mechanical fasteners

• U.L. Classified, FM approved, ICBO #ER-4287

Base-N-Ply®

consists of a TAMKO fiberglass mat coated on both sides with asphalt that has been lightly modified with SBS rubber. TAMKO manufactures the lightly-modified SBS fiberglass products to offer a lower-cost, lighter-weight alternative to Versa-base. Made by fiberglass mats using a computer-controlled monitoring system to maintain precise thickness and fiber formation. This assures high-quality product construction and long-life characteristics for the entire roofing system.

• Lightly-modified SBS fiberglass base sheet

• Use as a base ply over nailable decks

• Eliminates wrinkling that can occur with
  typical fiberglass base sheets

• 5-year limited product warranty

• Apply with hot asphalt or mechanical fasteners

• U.L. Classified

Tam-Glass-Premium®

is a high-performance fiberglass ply sheet constructed with a TAMKO heavyweight fiberglass mat coated with weathering-grade asphalt. It demonstrates excellent isotropic tensile strength. System tensile strength is far greater than current NBS performance criteria.

• Heavyweight fiberglass mat impregnated
  with coating asphalt

• Use as reinforcing ply in select built-up and
  modified specifications

• 10-year limited product warranty

• 5- to 20-year system limited warranties
  available

• Apply with hot asphalt

• U.L. Type G/1 Classified, ASTM D-2178 Type VI, FM approved,
  ICBO #ER-4287

TAMKO-Glass Base®

is a fiberglass base sheet constructed with a heavyweight TAMKO fiberglass mat coated with weathering-grade asphalt.

• Heavyweight fiberglass base sheet

• Use as a base sheet in select modified
  asphalt and fiberglass systems or as an
  alternative to Type 43 Coated Base Sheet

• 5-year limited product warranty

• Apply with hot asphalt or mechanical
  fasteners

• U.L. Type G/2 Classified, ASTM D-4601 Type II,
  FM approved, ICBO #ER-4287

 

Vapor-Chan®

is a heavyweight venting base sheet constructed with a TAMKO fiberglass mat coated with weathering-grade asphalt. The bottom surface is embedded with mineral granules and embossed with a brick/stone pattern.

• Heavyweight fiberglass-based venting
  sheet coated with weathering-grade
  asphalt

• Bottom surface is embedded with ceramic
  mineral granules and embossed

• Use to relieve vapor pressure over
  lightweight insulating concrete decks or
  in systems built over existing roofing systems

• 5-year limited product warranty

• Apply with hot asphalt or mechanical fasteners

• U.L. Type G/2 Classified, ASTM D-4897 Type II, FM approved,
  ICBO #ER-4287

Tam-Ply-IV®

is a high-performance fiberglass ply sheet constructed with a TAMKO fiberglass mat coated with weathering-grade asphalt. It has product and system tensile strength exceeding current ASTM and NBS recommendations.

• Fiberglass mat exceeds ASTM weight
  requirements by 11%

• Coated with weathering-grade asphalt

• Use as base ply or reinforcing ply in select
  built-up and modified specifications

• 10-year limited product warranty

• 5- to 15-year system limited warranties
  available

• Apply with hot asphalt

• U.L. Type G/1 Classified, ASTM D-2178 Type IV, FM approved,
  ICBO #ER-4287

TAMKO® APP G

is reinforced with a 180 g/m2 non-woven polyester mat saturated with asphalt and coated on both sides with APP-modified asphalt, surfaced with ceramic granules for protection from ultraviolet degradation and finished with a waffle back burn-off film. It is a granule surface polyester reinforced APP (Atactic Polypropylene) modified with a waffle back burn-off film.

• High puncture & tear resistance - reinforced with a heat
  resistance strong non-woven polyester mat for maximum
  protection in high traffic areas

• Waffle backed - for easy torch application

• Granulated - for improved weathering and greater aesthetic
  value

• 12-year limited material warranty

• Suitable for both winter and summer projects - one product for
  all seasons

• Manufactured to conform to ASTM-D-6222-98, Type II, Grade G

TAMKO® APP S

is a durable smooth surface polyester reinforced APP (Atactic Polypropylene) modified with a waffle back burn-off film. It provides a tough, flexible asphalt roofing membrane and easy application. Roofing membrane in Series 1200 Specifications, APP flashing membrane in all TAMKO APP flashing details with approved coating. TAMKO APP S is ideal for both new construction and re-roofing on low slope roofs of any size.

• High puncture & tear resistance - reinforced
  with a heat resistance strong non-woven
  polyester mat for maximum protection
  in high traffic areas

• Waffle backed - for easy torch application

• 10 - 12-year limited material warranty

• Suitable for both winter and summer projects - one product for
  all seasons

• Manufactured to conform to ASTM-D-6222-98, Type II, Grade S